Whisper Spring Kit 1866,1873,1860 Henry
1 ) The complete Whisper Springs kit with 2 screws
2) Only the Whisper Springs
3) Only the 2 Screws
We highly recommend you purchase the complete kit with 2 screws. The original screws from Uberti are very soft.
The Whisper Spring kit is a direct replacement for the heavy stock lever and lifter springs found in the toggle link rifles.
No need to hand grind stock springs
No need to leave mounting screws loose
Eliminates gouged lever and lifter cam surfaces
*The original brass carrier is usually to heavy for the springs and we recommend replacing it with a lighter aluminum carrier (we have these carriers) or machining the original brass carrier to make it lighter.
The Whisper Springs are wire formed springs and may be adjusted by bending to give more or less pressure on the components. The naturally rounded form of the wire will not dig into the cam surfaces of the lever or lifter.
Don’t be afraid to tackle action jobs on the Uberti ’60, ’66 and ’73 Winchester clones for lack of viable parts. These direct replacement lifter and lever spring sets are made from music wire with a stainless steel mounting base for consistent action jobs time after time. No need to hand grind the stock springs or leave them loose. Completely eliminates gouged lever and lifter cam surfaces. Recommended for use with the high-quality, 6-40 tpi screw sets sold separately, because the rough, threaded factory screws are usually damaged when removed. Screws manufactured with correct head dimensions and length.
We also have replacement screws, if you would like to order them, also.
Warning: A competent gunsmith only should install these parts. All products are sold as is and without any warranty. No liability is expressed or implied for damage or injury which may result from the improper installation or use of these products.