A tool to SAVE & keep 357 Magnum, 44 Magnum and 45 and NOW 10mm
Colt CHAMBERS to SAAMI specifications.
Removes Carbon/Lead fouling collected in the front of .357 Magnum, 44 Magnum
and 45 Colt chambers after shooting any shorter cartridges
Significantly reduces throat erosion
Easy BREECH access to clean rifle chambers
Designed to fit standard 8-32 cleaning rod-tip threads
Convenient “Right Hand” turn for Rifle cleaning Rods
Slotted base for “ Left-Hand” turn for pistol cylinder chambers
Absolutely no impact on your present Chamber dimensions!
TK4B Enterprises, makers of SliXPrings products, announces a new innovation, the
SliX-Scraper, for removing that very hard carbon/lead build-up that adheres in .357
Magnum, .44 Magnum and 45 Colt chambers when shorter caliber ammunition is
continually fired through them. As is evident when comparing .44 Special and .44
Magnum case lengths there is at least .100”, or 1/10th inch, difference. Every time a
loaded shorter 44 cartridge is fired there is a certain amount of ’ejecta’ that is deposited in
this gap and eventually, the collection impairs chambering and accuracy in successive
rounds. At best it merely advances throat erosion.
Before attempting to design a tool to address this condition, we asked several long time
shooters how they corrected the problem. Replies varied from they don’t to using sharp
picks and a drill!! Knowing that there are many using shorter .44 ammo in .44 Magnum
chambers and that the condition was not going away, we took a stab and making a .44
Scraper like the previous .357 and .45’s.
After receiving numerous requests for a .44 scraper, it was decided to produce one for the
market, you folks. So, here it is.
Now, as you can see below, there is a complete family of “SliX-Scrapers” for continued
efficiency and accuracy in all of your firearms.
The whole SliX-Scraper family is made of a high strength alloy, heat-treated then blued.
They are all dimensioned to stringent SAAMI specifications and have a minuscule chance of
ever touching your hard chamber. The threaded end attaches to any standard cleaning rod
with an 8-32 female thread and in this configuration offers an easy RIGHT-hand twist
of a few turns with a LIGHT pull to remove years of collected hard lead and powder residue
at the front of any chamber. To remove the collected ejecta from any pistol
cylinder chamber merely place the SliX-Scraper into the chamber and, using a thin
slotted screwdriver turn it to the LEFT! In either case, you can easily feel when the
chamber is clear. Please see the photos for the application.