Uberti 1873 / 1866 Bullet Alignment Kit w/ Tube, Spring and Follower  up to 24"
Uberti 1873 / 1866 Bullet Alignment Kit w/ Tube, Spring and Follower  up to 24"
  • Load image into Gallery viewer, Uberti 1873 / 1866 Bullet Alignment Kit w/ Tube, Spring and Follower  up to 24"
  • Load image into Gallery viewer, Uberti 1873 / 1866 Bullet Alignment Kit w/ Tube, Spring and Follower  up to 24"

Uberti 1873 / 1866 Bullet Alignment Kit w/ Tube, Spring and Follower up to 24"

Regular price
$80.00
Sale price
$80.00
Regular price
Sold out
Unit price
per 
Shipping calculated at checkout.

Uberti 1873 / 1866 Bullet Alignment Kit w/ Spring and follower 20” or 24”

These are easily cut for a shorter size.
--

 

1873/1866 Bullet Alignment Kit


All 1873 reproduction rifles are fitted with a 45- colt magazine tube from the factory regardless of caliber. When loading rounds into the 357 caliber rifles the bullets cannot align properly in the magazine tube due to the over -sized diameter of the factory tube. This staggered bullet effect will cause a slight hanging feel in your rifle making it OAL sensitive. This Alignment Kit will eliminate this issue. Our "NEW" bullet Alignment tubes are made from a super light carbon fiber base compound and are a perfect fit inside the factory tube but will NOT add weight to your rifle like other Alignment kits. These kits are cut for a 24" barrel rifle, but can be easily fitted to any shorter barrel length. Kits include a new stainless steel magazine spring and stainless steel follower. All kits are shipped with a 26 inch spring for the 24 inch kits. Once the kit is installed leave 3 inches of spring sticking out of the factory mag tube and trim the remaining amount off.